Taillieu.Info

More Than a Hobby..

Universal Garage Door Cloning Remote Control Key

Product Details Price Per Unit Quantity Order Total Status  

Universal Garage Door Cloning Remote Control Key Fob 433Mhz Gate Copy Code EMS DHL Free Shipping New Arrival Promotion

(s v)

 

       

4 key Wireless Remote Control DC 12V Empty Code 4- channel 433 MHz for antitheft alarm system window controlleretc Free Shipping

(s v)

 

       
 

Did you received the item?
Also please find more detail of the items below:
77884:
Product description
Press to press remote control user manual
The press to press RC(remote control) can be used without copy master,it sends and receives signal & does copy by itself,mostly used in area of auto,electric-door,etc.It is fit for kinds of fixed code copy.And study IC style as belows:AX5326-3
PT2262PT2260EV1527FP527PT2242HT600HT680HT6207HT6010HT6012HT6014AX5326-4SMC918PT2240HT6013HT6013HT12D and so on;
Clear code:Press lock & unlock button at the same time,LED light will flash 1time after 2s(second),then loose unlock button only,and press it 3times(the action need be finish in 3s).Then when the light keep flash,the code cleared.
Copy:take the original RC by left hand,and our product by right,closer them as possible(back to back will be better).Press 2 lock button at the same time,after 3s,the light will flash 3times and keep flashing then.It showed the lock-button-copy action successful.Other buttons do the same process.
Revert:When you clear the RC code carelessly,press lock & mute button at the same time.After 3s,LED light flash 3times then keep flashing,it showed the code recovered.
Adjust frequency:If it is fixed frequency,press any button to have a test.If it is adjust frequency(on 315MHz,can be test directly),find your frequency by non inductive regulator on the chip board,range from 280--450MHz.Pls kindly note,for metal RC,pls lower 3MHz around to remove the influence caused by metal.For example,adjust 315MHz to 312MHz,and 433MHz to 431MHz on the chip,when you fixed on the metal RC shell,the frequency will increase litt
79121.02
Working voltage: DC12V(27A/12V battery x1, Included)
Output Voltage: AC and DC optional
Working frequency: 433MHz
Key: 4 Keys
Emission Distance: 20-50m (Open area)
Transmission rate: 50-60 KHz
The working temperature: -10°C to 50°C
Encoding type: Learning Code
Working chip: EV1527
Resistance: 330K
Case material: Metal
Size: 53*31*10mm
Uses: Family, shopping malls anti-theft alarm system, electric vehicles, automotive, motorcycle alarm, all kinds of door and window controller and other industrial control.
Hope these information may help you
Juliana

1, Clear out code:

To Clear up test stored rf signal memory from factory by pressing the locking key and unlock the key at the same time, two seconds later, LED indicator light flashes three times, followed by a continuous fast blinking. Indicates that the remote control codes stored has been cleared out.

2, Duplicating (learning)

 Hands are holding remote control , and the other are holding the duplicating remote control, 2 remote controls put together as close as possible, while pressing the remote controls two match button,(eg: A-A’,B-B’) three seconds later, LED indicator light flashes three times, followed by a continuous fast blinking. This indicates that this copy of the remote control buttons are same as copied on the remote control button codes . Several other keys are also according to the above approach to learning.

3, Recovery code  

 If the code copied have been mistakenly removed the remote control, you do not worry, the remote control can restore yourself. Method is pressing (up-down eg: locking key and bell key) two buttons (metal shell remote control on the left, the plastic shell remote control on the right) at the same time ,3 seconds later, LED indicator light flashes three times, followed by a continuous fast blinking. This indicates that the original remote control codes have been restored.

 

http://blog.tinydeal.com/2011/03/30/how-to-use-rf-wireless-remote-control-universal-controller-keychain/

Operating Instructions:

1. Clear

 

Please press lock key and unlock key at the same time, after 2s LED light flashing 3 times, then flashing fast while still keep pressing the two keys, it indicates clearing successfully.

Note: if the LED didn’t flash, please checked the batteries installation; if the batteries are installed in the right way, please return to the manufacturers for maintenance.

2. Duplicating

With left hand handling the original remote control, right hand handling the duplicating remote control, keeping the two as close as possible, at the same time pressing the lock button of the two controllers, after 3s LED light flashing 3 times, then flashing fast, it shows that the original control of the lock key code has been copied into the duplicating remote control. The other three buttons are operated in the same way for duplication.

3. Resume

If you clear any codes of duplicating remote controller incautiously, you can press start key and mute key simultaneously, after 3s LED light flashing 3 times, and then flashing fast it shows the code of duplicating remote control is resumed.

Some tips for clearing and duplicating:

In the process of duplicating, when one of the key codes couldn’t be successfully duplicated while others function normally, you can try this way: first conduct clearing operation, duplicate the key code again for the one fail to be duplicated just now, conduct clearing operation again and then resume the key code of this button.

Note:

1) It is necessary to clear its present codes of duplicating remote controller before conducting duplicating operation.

How to test whether its present codes have been cleared successfully:

After clearing operation, press one of the four button, if LED light flash after about 2 seconds, it indicate key codes are cleared successfully; if LED light flash immediately when you press any button, it indicated there still exist key code; please repeated clear operation.

2) This kind ofRF remote controlcan only duplicate fixed code instead of scroll code.

MoreRF wireless remote controllersfor your option:

 

How to Use RF Wireless Remote Control Universal Controller Keychain

Recently a great deal of mini RF wireless universal remote controllers is released. They are designed with keychain, convenient to take with you anywhere. Here I will take 4 Buttons 315MHz RF Wireless Remote Controller Keychain STH-23301 as an example to tell you how to use these kinds of RF remote controllers, since most are applied in the similar way.

This remote controller has a high speed recording. It covers application ranging from simple domestic remote control to autonomous control. Cheap with just about $3.99 and extremely easy to set up. With the press of a button, the device can turn on, turn off, adjust its own volume and perform any number of device-specific tasks. Besides, it is designed to control a wide variety of electronic devices with a wireless signal for garage doors, electric gate, automatic barrier remote control, burglar alarm field and etc.

Product Specification

  • Working voltage: DC 12V
  • Operating current: 16mA
  • Operating frequency: 315MHz
  • Encode type: Learning code
  • Encode mode: EV1527
  • Transmitting distance: 180 meter
  • Net weight: 29.5g
  • Color: as shown in the picture
  • Size: 52 x 28 x 12mm

Display of Button Function

Operating Instructions:

1. Clear

Please press lock key and unlock key at the same time, after 2s LED light flashing 3 times, then flashing fast while still keep pressing the two keys, it indicates clearing successfully.

Note: if the LED didn’t flash, please checked the batteries installation; if the batteries are installed in the right way, please return to the manufacturers for maintenance.

2. Duplicating

With left hand handling the original remote control, right hand handling the duplicating remote control, keeping the two as close as possible, at the same time pressing the lock button of the two controllers, after 3s LED light flashing 3 times, then flashing fast, it shows that the original control of the lock key code has been copied into the duplicating remote control. The other three buttons are operated in the same way for duplication.

3. Resume

If you clear any codes of duplicating remote controller incautiously, you can press start key and mute key simultaneously, after 3s LED light flashing 3 times, and then flashing fast it shows the code of duplicating remote control is resumed.

Some tips for clearing and duplicating:

In the process of duplicating, when one of the key codes couldn’t be successfully duplicated while others function normally, you can try this way: first conduct clearing operation, duplicate the key code again for the one fail to be duplicated just now, conduct clearing operation again and then resume the key code of this button.

Note:

1) It is necessary to clear its present codes of duplicating remote controller before conducting duplicating operation.

How to test whether its present codes have been cleared successfully:

After clearing operation, press one of the four button, if LED light flash after about 2 seconds, it indicate key codes are cleared successfully; if LED light flash immediately when you press any button, it indicated there still exist key code; please repeated clear operation.

2) This kind of RF remote control can only duplicate fixed code instead of scroll code.

More RF wireless remote controllers for your option: