220V 10A 1CH wireless remote control system .
Working Voltage: AC220V
Working Frequency : 315MHZ/433MZH
Receiver sensitivity: : -105Db
Working temperature : -10'C - +60'C
Output way : Momentary Toggle Latched Adjustable
Code type : Learning code
Size :35*32*20mm
working/output way:
Jog/Non-Latched: press one button is working /ON. loosen your finger on the same button is stop/OFF .one channel switch need one buttons remote control
Self -lock/Self-Latched: press one button for one time is working/ON .press the same button again is stop/OFF .(one channel switch need one buttons remote control
Inter-lock /Latched : press one button is working/ON ,press another button is stop/OFF . ( one channel switchneed 2 buttons remote control
Learning Method:
Press the learning button3 seconds, the indicator light off .then you press any buttons of the remote control to transmite signal . it means studying successfully when the indicator flash 3 times until the indicator light on.
Remove code:
press the learning button about 8 seconds , the indicator turn on to off to on , it means the information that you keep have been removed successfully .
ransmitter:
Buttons: 1 Buttons
Working Voltage:DC12V
Operating frequency :315/433MHz
Remote Control Distance: 20-200m
Encode: Fixed code by soldering or EV1527 code
package include:
1* Receiver (included cover)
2*transmitter (with battery)
